TattooMagz

Engine repair by yourself

Many people think that doing an overhaul of the engine with their own hands is cheaper than going to a service station. But this is not always the case. For example, in some cases, it will be necessary to sharpen and refine the cylinder mirrors, as well as to replace the piston rings. At home, it is extremely difficult to perform such operations as sharpening cylinder mirrors and requires special devices, which are often very expensive. Therefore, in such a case, it is better to go to a service center.

For its part, JunkCarsUs notes that also during the overhaul at the service stations, the alternator, distributor, and starter of your car are diagnosed. If any faults are found, they will be replaced.

How to repair the engine

For those who are not afraid of difficulties, we have prepared a small guide on how to repair the engine:

  1. It is necessary to remove the engine from the car. For the “heart” of our car to lose weight, it will be necessary to dismantle some units. We disconnect the carburetor, remove the cylinder head cover, disassemble the alternator, disconnect the gearbox, remove the manifold, then disassemble the flywheel and clutch. After that, unscrew the pads and take out the “engine”.
  2. To get access to the pistons and crankshaft, it is necessary to remove the crankcase cover. Next, unscrew the connecting rods. Having access to the pistons, take them out. Then the piston pins must be removed from the pistons. It will now be necessary to remove the crankshaft as well as its liners.
  3. Carefully inspect for wear on the crankshaft journals as well as the liners. If necessary, they will need to be reamed. Don’t forget to also buy new liners, piston rings, and pins.

After purchasing the necessary spare parts, let’s start assembling the “engine”:

Also, see the topic: https://junkcarsus.com/article/engine-rebuild-cost-is-rebuilding-an-engine-worth-it

Exit mobile version